www.gmk-online.co.uk | 49 ® ® SPIGOTS CODE SIZE STA-P2084 Tube For Blaser 15 X 1 Metric Spigot CARE INSTRUCTIONS We recommend always detaching the silencer from the weapon when not in use. The silencer can get stuck on the barrel’s thread if it’s attached for a long time. Dry out if the inside is wet. Use compressed air, a heater, a hair dryer, a fan, or similar until completely dry. You can also place the detached silencer on a radiator or other that emits heat. It’s important that air can circulate inside the silencer. You don’t need to reattach every detail of the silencer when maintaining it. The Stalon X models are divisible between the front and back parts. You can take out the bowels, the core, of the Stalon RF which simplifies the clean-up process a lot on this small silencer that demands more maintenance. STEP 1. DRY OUT Always remove the silencer from the firearm when it is not in use. Allow the inside to dry if wet or damp. Use a heat gun, compressed air, hairdryer, fan, or similar until it is completely dry. STEP 2. CLEAN THE BORE Start by cleaning the bore from any gunpowder residue. This is best done with a gun cleaning brass brush or boresnake. STEP 3. LUBRICATE THREADS Wipe the threads of the silencer with a piece of paper to remove any dirt. If dirt gets into the split section, it will cause problems when disassembling the silencer later. Lubricate the split section between the front and back parts (if the silencer is divisible). Use Stalon silencer grease. STEP 4. BARRELS’S THREAD Also lubricate the barrel threads with the same grease. Ensure that these are also cleaned from any debris. STEP 5. OIL Finish by spraying a light gun oil for about 1-2 seconds (i.e., 1-2 short bursts) inside the silencer. STEP 6. STORE Store the silencer upright with the muzzle facing downward in a gun safe. CARE INSTRUCTIONS & WARRANTY REQ 1. 2. DETACH SILENCER DRY-OUT IF NEEDED NS & WARRANTY REQUIREMENTS 3. 4. LUBRICATE THREADS ON RIFLE & SILENCER WITH STALON SILENCER GREASE STORE DRY WITH FRONT-END DOWN FOR DRAINAGE CARE INSTRUCTIONS FOR WARRANTY REQUIREMENTS
RkJQdWJsaXNoZXIy Mjk5OTg=